PC-LR Lighting Cable

PC-LR Lighting Cables are designed to introduce power to the lighting fixture to which they are installed and to continue AC power connections to the remaining fixtures on the circuit. Cables are provided with push-in terminals for fast, easy fixture connection. Multiple switching functions can be accommodated by Plug-N-Go Lighting Cables. All Power Built modular wiring components are keyed & color coded for easy installation.

Features

Easily installed
Connects to all standard fixtures
Push-in terminals allow fast, easy fixture connection
Full 20 amp rating
Single, dual and three circuit models
#12 AWG copper conductors standard
#10 AWG copper conductors optional
600V, 90º C insulation
Dead front construction for safety
Connectors are color coded for easy voltage identification
Keyed components assure proper connection, function, and safety
Positive locking clips prevent accidental disconnection
Approved for installation in air handling spaces other than ducts and plenums
UL-listed

Description

PC-LR Lighting Cables provide AC power to lighting fixtures and consist of conductors enclosed in a flexible metal jacket, with a male load-side connector and a female line-side connector. The load side connector is designed to install in 1/2″ knockouts. The connector provides leads with push-in terminals for easy attachment of the lighting fixture’s input wires. Lighting Cable connectors feature recessed electrical terminals, resulting in a dead-front design for added safety. All connectors are color-coded for easy voltage identification and keyed to allow mating connections only with components of the same voltage. Secure connections are assured by locking clips on the component rear cup assemblies, which prevent accidental disconnection. Cable length is based on project requirements.

Function

The Lighting Cable is designed to connect and deliver AC power to lighting fixtures. Lighting Cables are available in 1, 2 or 3 circuit models which can accommodate all single and dual level switching functions.

NOTE: Lighting Cables are manufactured using type MC cable with #12 AWG copper conductors and 90°C insulation and should be supported in accordance with National Electrical Code requirements.

Color Coding

Connector Color → Voltage

Gray → 277/480 and 480VAC

Brown →120/208, 208 and 240VAC

Purple → Dual Neutral 120/208VAC

Khaki → Dual Neutral 277/480VAC

Green → Isolated Ground 120/208VAC